20+ YRS EXPERIENCE IN THE 4WD INDUSTRY 
OVER 11,000 4WD PRODUCTS ONLINE 
20+ STOCKISTS AUSTRALIA WIDE 
SHIPPING AUSTRALIA WIDE & INTERNATIONALLY 
Superior Weld in Coil Conversion VSB14 Approved 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/Nitro Gas Twin Tube Shocks (Front and Rear) Suitable For Toyota LandCruiser 79 Series Gen 2 Single Cab (VSC Models) - SUP-NG-79G2SC-CCW-TCDD2KIT
| Brand: Superior Engineering | Product ID: 47480 | |
| SKU: SUP-NG-79G2SC-CCW-TCDD2KIT | ||
Please Select From Series:
Dual Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/Remote Reservoir Shocks (Rear Only)
Price: $15,516.00
Dual Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/Nitro Gas Twin Tube Shocks (Front and Rear)
Price: $16,076.00
Dual Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/Remote Reservoir Shocks (Front and Rear)
Price: $17,112.00
Dual Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/2.5 Remote Reservoir Shocks (Rear Only)
Price: $16,226.00
Dual Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/2.5 Remote Reservoir Shocks (Front and Rear)
Price: $18,442.00
Single Cab Base Kit - No Shocks/Coils
Price: $14,290.00
Single Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/Nitro Gas Twin Tube Shocks (Rear Only)
Price: $14,998.00
Single Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/Remote Reservoir Shocks (Rear Only)
Price: $15,516.00
Single Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/Nitro Gas Twin Tube Shocks (Front and Rear)
Price: $16,076.00
Single Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/Remote Reservoir Shocks (Front and Rear)
Price: $17,207.00
Single Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/2.5 Remote Reservoir Shocks (Rear Only)
Price: $16,226.00
Dual Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/2.5 Remote Reservoir Shocks (Front and Rear)
Price: $18,537.00
Dual Cab Base Kit - No Shocks/Coils
Price: $14,290.00
Dual Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/Nitro Gas Twin Tube Shocks (Rear Only)
Price: $14,998.00
Dual Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/Remote Reservoir Shocks (Rear Only) Price: $15,516.00
Dual Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/Nitro Gas Twin Tube Shocks (Front and Rear) Price: $16,076.00
Dual Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/Remote Reservoir Shocks (Front and Rear) Price: $17,112.00
Dual Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/2.5 Remote Reservoir Shocks (Rear Only) Price: $16,226.00
Dual Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/2.5 Remote Reservoir Shocks (Front and Rear) Price: $18,442.00
Single Cab Base Kit - No Shocks/Coils Price: $14,290.00
Single Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/Nitro Gas Twin Tube Shocks (Rear Only) Price: $14,998.00
Single Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/Remote Reservoir Shocks (Rear Only) Price: $15,516.00
Single Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/Nitro Gas Twin Tube Shocks (Front and Rear) Price: $16,076.00
Single Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/Remote Reservoir Shocks (Front and Rear) Price: $17,207.00
Single Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/2.5 Remote Reservoir Shocks (Rear Only) Price: $16,226.00
Dual Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/2.5 Remote Reservoir Shocks (Front and Rear) Price: $18,537.00
Dual Cab Base Kit - No Shocks/Coils Price: $14,290.00
Dual Cab 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/Nitro Gas Twin Tube Shocks (Rear Only) Price: $14,998.00
Available Options
$16,076.00 (Kit)
Supply Only Price.
-+
more info
|
Superior Weld in Coil Conversion VSB14 Approved 2 Inch (50mm) Lift Kit with Track Corrected Chromoly Diamond Diff Housing w/Nitro Gas Twin Tube Shocks (Front and Rear) Suitable For Toyota LandCruiser 79 Series Gen 2 Single Cab (VSC Models)
Please Note: Due to supply issues, the colour of the coil springs you receive may vary from the coils pictured. All coils used in Superior Engineering Kits are made from quality Australian manufacturers.
Note: Superior Engineering highly recommends the use of an EPRS rust prevention unit when fitting any weld on chassis components.
The Use of Electronic Rust Prevention can assist in the prevention of rust formation.
Superior recommends using an 8 Coupler system for most vehicles, please see the related products tab above.
The Superior Engineering LandCruiser 79 coil kits can be supplied to suit a wide range of applications. We have packages and options from – VSB / State approved kits that use your factory housing in either Bolt-In or Weld-In to our bigger kits that can be Federally approved. These larger Federally approved kits allow a metric equivalent or imperial 35” tire, 4” suspension lift kit, 4-tonne GVM, Wide-Track Chromoly housing.
With so many options available Superior Engineering can supply a kit to suit just about any application, whether you’re just a weekend wheeler that has no weight and puts the dog in the back, a Tradie that is loaded through the week and unloaded on the weekends or a fully kitted-out 4T+ tourer.
The Ultimate diff housing starts with 4140 Chromoly 13.5mm wall housing tubes that are ~900Mpa average Yield Strength where our competition uses ~6mm wall carbon hollow bar that is ~470Mpa, meaning just in the tubes alone a Superior Engineering housing are almost double the strength over our competitors. FEA tests were completed with 15-tonne load on the rear axle, and even then they only showed a deflection in the housing of less than 1mm, no other brand LandCruiser housing come close!
For more detailed information please Click Here
FEATURES & HIGHLIGHTS
- Weld-In Kit Featuring 4 x Chassis Side Strengthening Braces
- Heavy Duty Sway bar & Coil Tower Brace
- Uses Factory Mounting Locations For A Precise Fit
- Supplied Pre-Fabricated For An Easy Installation
- Improved Roll Axis For Tyre Clearance
- Increased Wheel Travel & Articulation
- Adjustable Upper Control Arms
- 40mm OD Fixed Lower Control Arms
- Reduced Bush Bind Over A 5-Link
- Compatible with Coil Air Bags
- 4-Link Rear Suspension Setup
- Fully Adjustable Pinion Angle
- Provides More Precise Handling
- Improved Comfort & Ride
- 350 Grade Steel Mounts
- Supplied with Sway Bar
- Will work on up to 5” lift
- Superior Track Corrected Chromoly Diamond Diff Housing, with a Higher load rating than competitors at 3150kg
Kit Contains
- Side Chassis Brace
- Sway Bar Kit
- Upper Control Arm Mounts (Diff and Chassis)
- Lower Control Arm Fixed Pins
- Lower Control Arm/Shock Mount
- Coil Tower/Bracing
- Lower Coil Mounts
- Upper Adjustable Control Arms
- Lower Control Arms
- Handbrake Relocation Bracketry
- All Required Bolts and Fasteners
- Superior Engineering Track Corrected Chromoly Diamond Diff Housing, with a Higher load rating than competitors at 3150kg
- Front Coil Springs
- Rear Coil Springs
- Front Superior Nitro Gas Twin Tube Shocks
- Rear Superior Nitro Gas Twin Tube Shocks
- Superior Steering Damper
NOTE: Some modifications to the rear of the exhaust system will be required to fit this kit.
NOTE: The welding of this kit must meet or exceed Australian Standard AS 1554 Structural steel
welding Category SP. In general, for approval purposes, this part needs to be welded by a qualified
welder who has performed and understands the correct welding procedure that is required.
For warranty reasons, when fitting a lift kit you should always fill out a "Fitment Form".
Genuine/Non Genuine –
Advertised parts are not genuine (unless specifically stated) and manufacturer
references are for application purposes only.
Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
| Vehicle Information | |
| Lift Height | 0-2 inch |