Superior Comp Spec Heavy Duty Solid Bar Drag Link Suitable For Toyota Landcruiser 76/78/79 Series Adjustable
Only suitable for suspension lifts of 2" or greater, NOT to be used on standard height suspension
This is an adjustable Drag Link Comp Spec Suitable For Toyota Landcruiser 76/78/79 Series (V8 model only).
New design with a stronger high angle Nissan style rod ends.
Comp Spec Drag links are made from High Tensile Steel Bar, 35OD solid 4340m finished in an anti-corrosion zinc finish.
Ideal for the hardcore 4wheeler or if you just want piece of mind you wont bend your steering rods.
This will give you peace of mind you will never be stranded with a bent steering link.
The drag links come complete with drag link ends.
Patent – 2019100726
Patent Pending - 2018904644
NOTE: Superior recommends the use of the Superior Steering Damper with this Draglink. if using a different Damper it must not be longer than 470mm full closed.
Please also note that the lower radiator hose clamp should be rotated for clearance of the damper. please see the image below for reference.
Superior Engineering and other Brands of Steering components are replacement items that are in most cases upgraded to be a stronger better choice than the factory item. The Superior Engineering steering Components will meet or exceeds the factory specifications of OEM products. Although Superior Engineering and other brands may be stronger or exceed OEM specifications maintenance must still be performed on the components to ensure a safe and reasonable life out of the products. For all steering products it is recommended to carefully check over the ends, internal and external threads and on hollow bars inside the rod every service you have on the vehicle or 6 monthly minimum to ensure nothing is loose or damaged or rusted. It is recommended to ensure no rust has formed on any steering parts as this may shorten the life or warranty of the product. Due to the harsh environments such as beach work or general 4wding rust may quickly form on steel steering components, it is recommended to replace the items if rust is present. If there is any wear or play in the ball joints, Tie rod ends or threads they must also be replaced for safety.
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
|Lift Height||0-2 inch|3 inch|4 inch|5 inch|6 inch|