20+ YRS EXPERIENCE IN THE 4WD INDUSTRY 
OVER 11,000 4WD PRODUCTS ONLINE 
20+ STOCKISTS AUSTRALIA WIDE 
SHIPPING AUSTRALIA WIDE & INTERNATIONALLY 
Offroad Racing
Sub-Categories
NSV Quick Release Extinguisher Bracket Suitable For Ford Ranger PY 2022 on - NSV0013-07
NSVs Quick Release Extinguisher Clamps are designed to securely store an 80mm Fire Extinguisher bottle and allow quick deployment of the extinguisher in the event of an emergency. Built around the use of gross motor skills, there are no co..
$110.00 Ex Tax:$100.00
NSV Quick Release Extinguisher Bracket Suitable For Isuzu D-Max 2018 on - NSV0013-03
NSVs Quick Release Extinguisher Clamps are designed to securely store an 80mm Fire Extinguisher bottle and allow quick deployment of the extinguisher in the event of an emergency. Built around the use of gross motor skills, there are no co..
$110.00 Ex Tax:$100.00
Profender 4x4 2.0 Inch Bump Stop Threaded Can ONLY (Each) - SHB-65-M52X2.0-65
This is a replacment threaded can to suit the Profender 4x4 2.0 Bump Stops
Sold Each..
$67.00 Ex Tax:$60.91
Superior Shock Mounts Ultra4 Buggy 12mm Bolt - HLXLSM
Low mounts can be used to replace the original bottom shock mounts to gain ground clearance.
The mounts are supplied with 12 mm bolts, If the shocks use larger bolts a crush bar may be needed.
Tough dogs and rancho shocks can use a replacement ..
$130.00 Ex Tax:$118.18
Superior Shock Mounts Ultra4 Buggy 16mm Bolt (Each) - GQGULSM
Low mounts can be used to replace the original bottom shock mounts to gain ground clearance.
The mounts are supplied with 16 mm bolts, if the shocks use larger bolts a crush bar may be needed.
Tough dogs and rancho shocks can use a replacement ..
$130.00 Ex Tax:$118.18
1.0kg Fire Extinguisher 1A:10BE (Plastic Bracket) (Each) - FW3
We stock a range of A.B.E. class, hand-held, portable, dry chemical fire extinguishers.
They are ideal for the home, office & worksite.
In the event of a fire they quickly distribute a safe, non-toxic ammonium phosphate powder which ..
$30.00$28.00 Ex Tax:$25.45
1.0kg Fire Extinguisher 1A:20BE (Metal Bracket) (Each) - FW4
We stock a range of A.B.E. class, hand-held, portable, dry chemical fire extinguishers.
They are ideal for the home, office & worksite.
In the event of a fire they quickly distribute a safe, non-toxic ammonium phosphate powder which ..
$35.00$33.00 Ex Tax:$30.00
1.5kg Fire Extinguisher with Rubber Hose 2A:30B:E (Each) - FW1
Complies with CAMS requirements under Schedule H for Speed Events Races and Drifting.
Complies with AS2444 Section 5.4 Table 5.1 for passenger carrying vehicles and cargo carrying vehicles...
$50.00$47.00 Ex Tax:$42.73
Chromoly Double Shear Bracket (Each) - 303477
Chromoly Double Shear Bracket
The Chromoly Double Shear Brackets are made out of 1/8” thick 4130 chromoly steel and are the strongest double shear brackets on the market.
These Double Shear Brackets are designed for double shear mounting limit str..
$30.00$24.00 Ex Tax:$21.82
Chromoly Rod End/Heim Joint 3/8 Inch (Left Hand Thread) (Each) - XML6
PLEASE NOTE: these are NEW OLD STOCK items and are being sold at Heavily discounted prices, some are below our cost.As such we can not accept returns on change of mind or incorrect purchases.Stock is limited and we can not guarantee current stock lev..
$38.00$18.00 Ex Tax:$34.55
Chromoly Rod End/Heim Joint 3/8 Inch (Right Hand Thread) (Each) - XMR6
Chromoly Rod End 3/8" (Right Hand Thread)
Bare rod end only no weld in bung, lock nut or missaliangment spacers.
SOLD EACHTerminologyEye I.D: Inside measurement if the heim eye without the misalignment spacer.Shank: The shank size is the thread nee..
$18.00$9.00 Ex Tax:$16.36
Chromoly Rod End/Heim Joint 7/8-7/8 Inch (Left Hand Thread) (Each) - XML14
Chromoly Rod End 7/8" (Left Hand Thread)
Bare rod end only no weld in bung, lock nut or missaliangment spacers.
SOLD EACH
Terminology
Eye I.D: Inside measurement if the heim eye without the misalignment spacer.Shank: The shank size is the thread ..
$43.00 Ex Tax:$39.09
Chromoly Rod End/Heim Joint 7/8-7/8 Inch (Right Hand Thread) (Each) - XMR14
Chromoly Rod End 7/8" (Right Hand Thread)
Bare rod end only no weld in bung, lock nut or missaliangment spacers.
SOLD EACH
Terminology
Eye I.D: Inside measurement if the heim eye without the misalignment spacer.
Shank: The shank size is ..
$43.00 Ex Tax:$39.09
Chromoly Rod/Heim Joint End 3/4 Inch (Left Hand Thread) (Each) - XML12
Chromoly Rod End 3/4" (Left Hand Thread)
Bare rod end only no weld in bung, lock nut or missaliangment spacers.
SOLD EACH
Terminology
Eye I.D: Inside measurement if the heim eye without the misalignment spacer.Shank: The shank size is the thread ..
$48.00 Ex Tax:$43.64
Chromoly Rod/Heim Joint End 3/4 Inch (Right Hand Thread) (Each) - XMR12
Chromoly Rod End 3/4" (Right Hand Thread)
Bare rod end only no weld in bung, lock nut or missaliangment spacers.
SOLD EACH
Terminology
Eye I.D: Inside measurement if the heim eye without the misalignment spacer.Shank: The shank size is the thread..
$48.00 Ex Tax:$43.64
Clevis Bushing Kit (Double Strap) (Kit) - 300786-KIT
Limiting Strap Clevis Bushing Kit
Want to change your Limit Strap Clevis to a different configuration?
These replacement bushing and Grade 8 hardware sets allow you to change your Clevis to a single limit strap or multiple limit strap configura..
$42.00$34.00 Ex Tax:$30.91
Clevis Bushing Kit (Single Strap) (Kit) - 300785-KIT
Limiting Strap Clevis Bushing Kit
Want to change your Limit Strap Clevis to a different configuration? These replacement bushing and Grade 8 hardware sets allow you to change your Clevis to a single limit strap or multiple limit strap configuratio..
From $42.00$34.00 Ex Tax:$30.91
CruzArmor Pyrotect SA2020 Helmets Shield-Clear (Each) - CRUZARMOR-PYRO-SA20
Eliminate scratches and nicks from everyday riding and desert racing with CruzArmor! This clear helmet shield is a direct replacement for worn-out or cracked Pyrotect SA2020 helmet shields. CruzArmor offers the ultimate self-healing protection for he..
$240.00$235.00 Ex Tax:$213.64
Gforce Ribbon Window Net Blue SFI-27.1 (Each) - GF-4131BU
G-FORCE Racing Gear Ribbon Window Nets are all jig built to ensure consistent dimensions.
1” wide webbing and double overlap construction provide a strong, durable net...
$50.00$40.00 Ex Tax:$45.45
Lock Nut 1.25 Inch (Left Hand Thread) (Each) - JNL16
Lock Nut 1.25" (Left Hand Thread)
Bare lock nut only no rod end, weld in bung or missaliangment spacers.
SOLD EACH
Terminology
Shank: The shank size is the thread size of the rod end to be screwed into the bung.
Shank = 1 1/2"..
$10.00$5.00 Ex Tax:$9.09
Lock Nut 1/2 Inch (Left Hand Thread) (Each) - JNL8
Lock Nut 1/2" (Left Hand Thread)
Bare lock nut only no rod end, weld in bung or missaliangment spacers.
SOLD EACH
Terminology
Shank: The shank size is the thread size of the rod end to be screwed into the bung.
Shank = 1/2"
..
$5.00$2.00 Ex Tax:$4.55
Lock Nut 1/2 Inch (Right Hand Thread) (Each) - JNR8
Lock Nut 1/2" (Right Hand Thread)
Bare lock nut only no rod end, weld in bung or missaliangment spacers.
SOLD EACH
Terminology
Shank: The shank size is the thread size of the rod end to be screwed into the bung.
Shank = 1/2"..
$5.00$2.00 Ex Tax:$4.55
Lock Nut 3/4 Inch (Left Hand Thread) (Each) - JNL12
Lock Nut 3/4" (Left Hand Thread)
Bare lock nut only no rod end, weld in bung or missaliangment spacers.
SOLD EACH
Terminology
Shank: The shank size is the thread size of the rod end to be screwed into the bung.
Shank = 3/4"..
$6.00$3.00 Ex Tax:$5.45
Misalignment Spacer 1 Inch to 14mm Zinc (Patrol Width) (Each) - DFIMS1-Patrol
Misalignment Spacer 1" rod end to 14mm mounting bolt
Bare misalignment spacer only no rod end, weld-in bung or lock nut.
SOLD EACH (2 x spacers needed per rod end)
Terminology
Spacer Width: This is the inside measurement of the mount..
$11.00 Ex Tax:$10.00
Misalignment Spacer 1.25 Inch to 3/4 Inch (Each) - SUP-CRE12534MAS
PLEASE NOTE: This product is a Clearance/Runout item and as such stocks are limited.
While we make every effort to make sure stock levels on the website are up to date we can not guarantee that this product is still available at the time of sale.
P..
$13.00$9.00 Ex Tax:$11.82
Misalignment Spacer 1.25 Inch to 9/16 Inch (Each) - SUP-CRE125916MAS
Misalignment Spacer 1.25" rod end to 9/16" mounting bolt
Bare misaliangment spacer only no rod end, weld in bung or lock nut.
SOLD EACH (2 x spacers needed per rod end)
Terminology
Spacer Width: This is the inside measurement of the ..
$11.00$5.00 Ex Tax:$10.00
MSA Safety Window Net (Angled) (Black) (Each) - MSA-WINNETANGBLK
MSA Safety window net oblong loop style
Dimensions
..
$40.00 Ex Tax:$36.36
MSA Safety Window Net (Rectangle) (Each) - MSA-WINNET-XXX
MSA Safety gear Loop style window net 18" x 24" (40cm x 60cm) Great for most forms of racing that require the use of a window net. Drag racing, circuit racing, speedway, 4x4, offroad.
..
$25.00 Ex Tax:$22.73
MSA Safety Window Net Mount Kit(Spring Loaded) (Kit) - MSA-WINDOWNETMOUNT
MSA Safety Window Net Mount Kit(Spring Loaded)
The MSA Safety window net mount kit is a spring loaded design that enables a driver and co-driver to quickly latch and unlatch the net.
The kit has a 26-1/2" wide top and 25" bottom bar an..
$65.00 Ex Tax:$59.09
MSA Safety Window Net with Straps(Black) (Each) - MSA-WINNETWSTRAPBLACK
MSA Safety Window Net With Straps(Black)..
$37.00 Ex Tax:$33.64