facebookInstagramTikTokYou Tube

Metalcloak Baller Joints™ HD Ball Joints Suitable for Jeep Wrangler JK - 1910

Brand:  Metalcloak Jeep Gladiator Lift Kits Product ID:  49415
SKU:  1910


$1,216.00  (Kit)

Supply Only Price.

-+
|

Product Details

"BALLER" Informal adjective: extremely good, impressive or excellent.

MetalCloak's Baller Joints™ HD Ball Joints for the Jeep JK Wrangler are the ONLY Ball Joints that are comprised of top level materials with ALL the best features contained in one package. This is the last ball joint you will ever need. Upper and Lower Load Bearing, Captured, Fully Sealed, Adjustable, In-Jeep rebuildable and Made in the USA.

Features Include:

  • Load Bearing Upper and Lower Joints
  • Hardened Tool Steel Races
  • Induction Hardened Chromoly Spindle & Ball
  • Composite Bushing for Radial Loads (Side to Side Movement)
  • Load Rated Composite Bushing at over 23,000lbs-each X2!
  • Fully Sealed top and bottom O-ring AND Shaft Wiper Seals
  • Recessed Zerk Fittings for Easy Service/Grease
  • Adjustable Pre Load for Upper & Lower Joints
  • In-JEEP Rebuildable Upper & Lower
  • Gold Zinc, Clear Zinc & Anodized Red Finish
  • Made in the USA

MetalCloak uses the best features and combines them with top quality materials to create a ball joint replacement set that is unrivaled; this is the only ball joint that is Fully Sealed, Captured, Adjustable, On-Jeep rebuildable and made in the USA. Replace your worn ball joints with the best you can get.

MetalCloak ball joints start with Chromoly Spindle & Ball with Induction Hardened surface strength that resists wear and provides a maximized bearing area to distribute force loads; the material gives superior ability to absorb energy without fracture over inferior materials.

Composite bearing sleeve slide over the spindle to handle shock loads and are the most resistant to deformation. Ball and spindle are both load bearing and utilize metal-on-metal strength captured with Tool Steel Races that eliminate memory steer and are long lasting.

Both upper and lower joints are adjustable for preload tension, have recessed zerk fittings for servicing and are sealed with multiple Buna-N Rubber O-Rings along with wiper seals on the shafts to keep contaminants out and grease in.

Aluminum lock nut and Thread on Top Cap capture the joints so there is no possibility of pulling the joints out of the C.

Anodized Red aluminum with Silver and Gold Zinc steel plated components highlight the quality and craftmanship and are sure to let others know you appreciate American Made quality and top notch performance. Sealed, Captured, Adjustable, and On-Jeep rebuildable; the last ball joints you will ever need.

THE TECH

Upper & Lower Upgraded Ball Joints

Upper & Lower Upgraded Ball Joints

MetalCloak offers the ONLY Ball Joints that are comprised of top level materials with ALL the best features contained in one package; this is the last ball joint you will need. Upper and Lower Load Bearing, Captured, Fully Sealed, Adjustable, In-Jeep rebuildable and made in the USA.

Upper Ball Joint Diagram

Upper Ball Joint Diagram

Load Bearing Joints

Pre-load on upper Ball Joint diverts force-loads from the lower joint and shares the load between both pivot locations.

Control Arm Duroflex Joint Alignment

Thread Together Captured Design

Ball Joints press in from the bottom of the C then the Aluminum lock nut and Thread on Top Cap capture the joints so there is no possibility of pulling the joints out.

Thread Together Captured Design

Shaft & Ball Benefits

Shaft & Ball Benefits

MetalCloak ball joints start with Chromoly Spindle & Ball with Induction Hardened surface strength that resists wear with superior ability to absorb energy without fracture over inferior materials while providing a maximized bearing area to distribute force loads.

Bearing Races

The Concave Bearing Races are high impact shock resistant machined and heat treated S-7 tool steel with maximum surface contact to spread force loads, this allows more pre-load relief while still resisting memory steer.

Bearing Races

Lower Ball Joint Diagram

Lower Ball Joint Diagram

Ball Joint Wrench

Ball Joint Wrench

The included wrench is specially designed and laser cut to precisely fits the lower ball joint and allows for ease of maintenance. The wrench is made of laser cut 3/16" hot rolled steel, the tool is finished in gold zinc for a classic premium look and long lasting MetalCloak quality.

Made in America

The MetalCloak Upper and Lower Ball Joints are made right here in the USA.

Made in America

What's in the Kit?

What are True Dual Rate Coils?
  • Upper Ball Joints
  • Lower Ball Joints
  • Ball Joint Wrench

TECHNICAL SPECIFICATIONS

ItemsDetails
Compatibility2007 - 2018 JK Wrangler
Upper Ball Joint Cap6061 Aluminum Hex
Upper Ball Joint SpindleChromoly Steel
Upper Ball Joint HousingAISI 1045 Steel
Lower Ball Joint CupAISI 1045 Steel
Lower Ball Joint SpindleChromoly
Ball Joint Wrench3/16" Hot Rolled Steel
CoatingGold Zinc | Clear Zinc | Red Anodize
Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
Vehicle Information
Lift Height0-2 inch|3 inch|4 inch|5 inch|6 inch|6 plus inch