20+ YRS EXPERIENCE IN THE 4WD INDUSTRY 
OVER 11,000 4WD PRODUCTS ONLINE 
20+ STOCKISTS AUSTRALIA WIDE 
SHIPPING AUSTRALIA WIDE & INTERNATIONALLY 
Legendex 409 Stainless Steel 3 Inch Exhaust Suitable For Holden Colorado 2.8lt 2012-2016 (Each) - EL-SETCOL-5PNT
| Brand: Legendex | Product ID: 28658 |
| SKU: EL-SETCOL-5PNT | |
Available Options
RRP: $1,595.00
Special Price: $1,531.00 (Each)
SAVE: $64.00
Special Price: $1,531.00 (Each)
SAVE: $64.00
Supply Only Price.
-+
more info
|
This Exhaust system is made in Australia to order, please allow up to 4 weeks for the exhaust to be made.
Legendex delivers serious grunt & rumble. That means much more power, engine life and economy - and that commanding presence,
that distinct sound that only Legendex delivers.
- Unrivalled 10 years off-road warranty
- 409 (exhaust grade) stainless
- Ceramic coated dump pipe with 30% thicker tube
- Heavy-duty hangers & brackets
- High-flow diesel specific cat
- High-flow stainless packed muffler
- Coated in 800-degree thermal paint
Up to 40% power gains
Paired with a Legendex PCM your Legendex exhaust will give you the maximum power gains.
You are guaranteed at least 10% gains with just the exhaust mod - but we have seen 24% gains on the dyno and up to 40% with both exhaust and PCM mods
Easier, safer towing
The extra power takes the stress out of towing. Hill climbs are easy. Safe, quick overtaking is back on the table. That extra power means safer manoeuvring.
Better fuel economy
Because your engine is more efficient it uses less fuel - typically 8-12% fuel savings. It won't be long before your investment pays for itself.
Easy DIY fit
We test fit every Legendex exhaust system on our backs in the dirt. No hoist or jacks are required. No cutting or welding. No special mechanical skills or tools are required.
We only use the factory mount points and WE GUARANTEE A PERFECT FIT - OR YOUR MONEY BACK!
Specifications
POWER GAINS: Up to 33% at the wheel with Legendex exhaust and Legendex PCM. Guaranteed at least 10% with Legendex exhaust only.
FUEL EFFICIENCY: Typical gains 8-12% greater fuel efficiency.
WARRANTY: 10 years off-road warranty (5yrs +5yrs extended warranty with registration)
PIPE SIZE/MATERIAL: 3" 409 (exhaust grade) stainless
DUMP PIPE: Ceramic coated hand-crafted 2mm tube. Coating insulates up to 200 degrees centigrade.
TURBO FLANGES: Heavy-duty 12mm steel plates
SYSTEM FLANGES: 10mm steel plate 2-bolt flanges for maximum clearances and greater system alignment adjustability.
EGT/PYRO FITTING: Yes - 1/4 NPT thread included bung. Note: 1/8 NPT and 1/8 BSP gauges require a thread converter which is cheaply and easily available online.
but most gauge supply the converter.
MUFFLERS: polished 304-grade stainless case with 409 stainless internals. Perforated straight-through high-flow internal design. Stainless wool and fibreglass packing.
MOUNT POINTS: All factory mount points. Re-use factory rubbers.
HANGERS: Heavy-duty hangers & brackets all collar mounted to tube.
CATALYTIC CONVERTERS: Twin high-flow diesel specific 200-cell stainless core cats. Euro-spec compliant. Not included with some system configurations.
SYSTEM COATING: Coated in 800-degree thermal paint.
INCLUDED: Detailed easy-to-follow instructions. System gaskets, nuts, bolts & pyro plug. Note: the factory turbo gaskets are a multi-layer metal gasket and maybe safely re-used.
System components will vary according to which system configuration is chosen.
Genuine/Non Genuine –
Advertised parts are not genuine (unless specifically stated) and manufacturer
references are for application purposes only.
Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.