facebookInstagramTikTokYou Tube
Sale

Car Builders Insul Layer - INL6

Brand:  Car Builders Product ID:  45792
SKU:  INL6
     (This item could be out of stock. If it is, we will contact you after your order is placed. Alternately, please contact us to check current stock levels.)
RRP:  $50.00
Special Price:  $48.00  (Each)
SAVE:  $2.00

Supply Only Price.

-+
|

Car Builders Insul-Layer is a peel and stick closed cell foam designed to fit in tight areas. It offers acoustic and thermal insulation, prevents condensation and is very affordable.  

Our Insul-Layer will not rot, attract mould and is easy to cut and apply.

NOTE: For all inverted applications such as roof skins and vertical applications, we recommend applying our upholstery grade Spray Adhesive rate at 120°C.

Features/Advantages:

  • Light Weight
  • Easy installation - just peel off the release liner and adhere to surface.
  • Cuts with scissor and knife
  • Reduces heat transfer
  • Does not rot or deteriorate
  • Affordable

    • Applications:

  • Roof skins 
  • Inside cavities
  • 1/4 panels
  • Doors
  • In-between trim panels to reduce vibrations/rattles (3mm Insul-Layer's main purpose)
  • Vans & campers (6mm 6.5M Roll is perfect for these)

    • What are the rules for applying a peel & stick product?

    It is vitally important when laying a peel & stick product that the surface is thoroughly cleaned to remove any grim or dirt. We use a wax and grease remover. If you use a product such as methylated spirits or turps, as these are oil based, they will leave a residue that can affect the bond. Use a isopropyl alcohol (wax and grease remover) to remove this film.

    Peel & stick products adhere well to metal surfaces, however if you are sticking the product to porous or rough materials, such as factory bitumen sound deadener, the product will require additional Spray Adhesive. 

    Peel & stick products should not be stretched when applied to a surface as the material will eventually want to 'pop' back.

    You need to ensure that peel & stick products are thoroughly rolled down, with pressure applied across the entire product to ensure that it has firmly adhered to the surface. We use our Application Roller.

    If you find an air bubble, you should pierce the bubble to release the trapped air and roll the product down firmly.

    We recommend using additional spray adhesive when using products in inverted positions or if you are directly adding further weight onto the product, such as glueing 4-way stretch carpet to the product's surface.

    Car Builders Insul Layer

    Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

    Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


    Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
    All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

    Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

    Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.