Sale

GME TX3100 Super Compact UHF CB Radio (Each) - TX3100DP

Brand: GME	Product ID: 26884
SKU: TX3100DP
High Stock

RRP:  $269.00
Special Price:  $258.00  (Each)
SAVE:  $11.00

Supply Only Price.

qty :

Australia's First DSP Powered Super Compact Radio

A super compact addition to the GME 80 channel UHF CB range with innovative 'flip' feature make for easy installation and incorporating the latest Digital Signal Processing technology. The GME TX3100 UHF CB radio is Australian designed and built and is one of the most advanced UHF Citizen Band radio available.

Combining the very latest in electronic hardware with the most up-to-date computer-aided design and manufacturing techniques to produce an extremely compact mobile radio with outstanding specifications and performance. The TX3100, with its front-mounted controls, is designed for unobtrusive mounting in modern vehicles. Its innovative features include a built-in loudspeaker housed within an extremely compact case.

Product Details:

Digital Signal Processing: Measures, filters and compresses standard analogue audio signals and converts them into digital format. Allows advanced RF and audio processing techniques to be applied to maximise the radios performance.
Advanced Signal Management: Suppresses unwanted signals on adjacent channels and matches the receiver frequency to the incoming signal. This unique GME feature is critical to optimise performance of 80 channel radios.
Dynamic Volume Control: Automatically compensates for variations in received audio level. This feature provides a constant audio output level, greatly enhancing the quality of the reception and simplicity of use.
Unique Display Flip Function: Unit can be mounted with the speaker facing upwards or downwards and the display flipped over using a simple key-press sequence to allow viewing of the display from either mounting orientation.
Adjustable squelch
Programmable scan function
CTCSS and DCS
Selectable duplex channels
External speaker socket
Five-year warranty
Australian design and manufacture

In the Box:

Mounting bracket
Screw pack
Microphone
Microphone clip
DC lead
Spare GME model label
Instruction manual

Product Specifications:

GENERAL
Compliant Specification	Meets AS/NZS 4365 for radio communications equipment in the UHF citizen and personal radio service.
Frequency Range TX	403-520MHz
Number of Channels	80 UHF CB
Channel Spacing	12.5 kHz
Operation Mode	Simplex channels 1–80 Semi Duplex channels 1–8, 41–48.
Scanning Speed	20 channels per second
Antenna Impedance	50 Ohms nominal
Nominal Battery Voltage	13.8 volts DC
Operating Voltage Range	10–15 volts DC
Overvoltage Protection	25 volts DC max. At 18 volts DC the RF power is reduced, and the words ‘Hi DC’ flash.
Overcurrent Protection	In-line 2A Fuse
Frequency stability	±2.5 PPM
TRANSMITTER
RF Output	5.0 watts max.
Spurious Emission	<-70 dBc
Modulation	FM
Maximum Deviation	<± 2.5 kHz at + 20 dB limiting
Transmit Frequency Response	+6 dB per octave 300 Hz to 3 kHz + 1-3 dB.
Current Consumption	1.5 amps with 50 Ohms termination
RECEIVER
Intermediate Frequencies	1st -38.85 MHz 2nd -450 kHz
Sensitivity	-123 dBm for 12 dB SINAD unweighted
Selectivity	-6 dB at + 3.5 kHz ‑60 dB at ± 12.5 kHz
Intermodulation Immunity	73 dB
Blocking Immunity	100 dB
Spurious Response Immunity	70 dB
Audio Output Power	70 dB
Audio Signal to Noise	>45 dB
Current consumption	< 180 mA muted 600 mA @ max. A.F output
Conducted Spurious Emission	<-57 dBm
MECHANICAL SPECIFICATIONS
Dimensions	102 (W) x 87 (D) x 23 (H) mm
Weight	158 grams

Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.

Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.

Vehicle Information
Lift Height	0-2 inch\|3 inch\|4 inch\|5 inch\|6 inch\|6 plus inch