Dynatrac EnduroSport® 3 Inch Suspension Lift Kit System 8 Suitable for Jeep Gladiator JT 2020 on - DT JT30-1X5310-L8

Brand: Dynatrac Jeep Lift Kits	Product ID: 49215
	SKU: DT JT30-1X5310-L8
High Stock

$5,819.00 (Kit)

Supply Only Price.

qty :

Product Details

The Dynatrac 3" Suspension Lift System 7 is designed for the driver looking to drastically improve the performance and ride quality of their vehicle. Made for adding lift, articulation, shock damping, wheel travel, and improved drivability.

100% bolt-on system makes for an easy install
2.5 EnduroSport shocks with Jeep JL specific valving offer greater shock damping and performance
3" front lift height and 1.5" of rear lift over stock
3" front, 2" rear increase in wheel travel
Adjustable front sway bar links and rear sway bar brackets eliminate sway bar bind
Adjustable track bars offer on-Jeep adjustability, improve steering response, and reduce suspension bind under articulation
Dual rate front coil springs and triple rate rear coils with a lifetime guarantee against sagging/breakage
Fits 35" tires (37" with optional extended bump stop spacer kit, Part # DT922071)
Improves on and off-road ride quality over stock
Tested under rigorous off-road conditions to validate tune, performance, strength, and durability
Tubular steel link arms with dual durometer bushings for noise-free performance, maximum articulation, and minimal bind

Additional Detail

The Dynatrac 3" Suspension Lift System 8 for the 2020-Up Jeep Gladiator JT is designed for the driver looking to drastically improve the performance and ride quality of their vehicle. System 8 builds off of System 4 with upgraded 2.5 EnduroSport shocks for improved shock damping and heat dissipation. This system includes 3" lift front dual rate coil springs, 1.5" lift triple rate rear coil springs, 2.5 EnduroSport shocks, bump stop spacers, adjustable front sway bar links and rear brackets, and all necessary hardware to complete the installation. The front lower links included with this system are constructed from thick wall steel tubing, provide increased castor numbers, and feature dual durometer bushings for noise-free operation, maximum articulation, and minimal bind. With this combination of components, Dynatrac was able to increase wheel travel numbers by 3" in front and 2" in the rear, significantly improving the performance of the 2020-Up JT. The 3.0" Lift System allows for fitment of 35" tires when used with Dynatrac's recommended wheel specifications. For users looking to install 37" tires, an optional extended bump stop spacer kit (Part # DT922071) is available.

Important Notes

OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Wheels: 17x8.5" w/ 4.5" Backspace / -6mm Offset
Recommended Aftermarket Tires: 35 x 12.50 (37 x 12.50 with optional extended bump stop spacer kit PN: DT922071)
TECH NOTE: Dynatrac's advertised lift heights are based around a typical Jeep JT build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher than advertised if installed on a stock-weighted vehicle.
TECH NOTE: Springs are NOT rated for use with models equipped with EcoDiesel engines.
TECH NOTE: Jeep Gladiator Mojave also requires a heim spacer kit, part # DT9611070
TECH NOTE: Spanner wrench available to aid in length adjustment. Part # DT9191014.

Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.

Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.