20+ YRS EXPERIENCE IN THE 4WD INDUSTRY 
OVER 11,000 4WD PRODUCTS ONLINE 
20+ STOCKISTS AUSTRALIA WIDE 
SHIPPING AUSTRALIA WIDE & INTERNATIONALLY 
Clearview Next Gen Tow Mirrors Suitable For Holden Rodeo 2003 to 2008 (Indicators, Electric, Chrome) (Pair) - CVNG-HI-DC-IEC
| Brand: Clearview Mirrors & Accessories | Product ID: 44467 | |
| SKU: CVNG-HI-DC-IEC | ||
Please Select From Series:
Manual, Black 
Indicators, Electric, Black Available Options
RRP: $1,035.00
Special Price: $994.00 (Pair)
SAVE: $41.00
Special Price: $994.00 (Pair)
SAVE: $41.00
Supply Only Price.
-+
more info
|
Electric Mirror Important Information
The ELECTRIC MIRROR feature is not standard for this vehicle. However, it can be ordered with the CLEARVIEW WIRING KIT to replace manually adjustable side mirrors with electrically adjustable Clearview mirrors. HARD-WIRING IS REQUIRED IN THIS SCENARIO ONLY and we recommend the installation be done by a registered Auto-Electrician. An ADDITIONAL 2-3 HOURS LABOUR should be allowed for the installation.
Clearview Towing Mirrors are the result of nearly 10 years of careful research and development.
Tested on the corrugated roads of Australia – from Cape York’s Telegraph Track to the Gibb River Road, Clearview Mirrors are purpose-built tough for Australian conditions.
Each mirror in the range is designed to handle any challenge the outback has to offer; earning their reputation as a top-quality product built to exceed customer expectations.
What Are Clearview Mirrors?
Clearview Towing Mirrors are a full replacement towing mirrors meant to replace your vehicle’s standard side mirrors.
Their clever design incorporates two different surfaces.
The top mirror features a flat, reflective surface that reflects vision directly down the sides of your caravan. Whilst a smaller, bottom convex mirror helps eliminate blind spots by giving you more vision out to the lanes beside your vehicle.
Clearview Mirrors are easy to adjust. So you’re always able to quickly switch the mirror to areas like tyres, wheels or the undercarriage of your caravan.
Clearview Mirrors are substantially larger than your standard side mirror. In standard driving position, Clearview Mirrors have a wider outwards reach of approximately 100mm; a total surface area much bigger than the standard models.
When you’re ready to tow, Clearview Mirrors slide out an additional 100mm! An additional extension that allows for around a total 200mm of extension over standard side mirrors.
Clearview Mirrors are also designed to manually fold inwards or outwards towards the car. In case someone brushes past you in a vehicle park.
The Superior Quality of Clearview Mirrors
Clearview Mirrors are built to last as long as your vehicle. Even longer in many cases.
Clearview Mirrors are injection moulded. And built from diecast aluminium to provide a firm and stable footing on every vehicle. Every Clearview Towing Mirror base is finished on a CNC milling machine for consistent accuracy and a perfect fit for every vehicle.
Clearview mirrors are built with steel arms through the centre for maximum strength. Arms that utilise cams precision cut from stainless steel on a high tech water cutting machine.
These cams are welded to the arms in Melbourne for the best levels of quality control and consistency. The finished arms are then coated in a special corrosion-resistant electro-coating paint process.
Final assembly takes place at Clearview’s Melbourne factory. Where they are powder-coated to ensure the highest level of finish possible. Every set of Clearview Mirrors are then inspected and tested, before being boxed and shipped to dealers or direct to customers.
Clearview Mirrors Are Legal in All Australian States And Territories
Clearview Towing Mirrors have been tested and approved as compliant with all applicable Australian Design Rules. Which ensures their legality in all states and territories of Australia.
Each model is designed to be vehicle specific.
All Clearview Mirror models have been individually tested by Evo Compliance, an NSW based firm with extensive experience within the automotive field and more than 15 years in automotive/mechanical engineering consulting vehicle compliance and certification.
Features
Manual Glass
Manually adjust upper flat mirror glass.
Electric Glass
Electrically adjustable upper flat mirror glass. Small lower convex mirror glass not available.
Indicators/Turn Signal
Lights on the outside of the mirror head will illuminate when you turn your indicator on. Indicators are required to be in Clearview Mirrors by law if you have pre-existing indicators in your OEM (Original Electric Mirror) mirror.
Sale Genuine/Non Genuine –
Advertised parts are not genuine (unless specifically stated) and manufacturer
references are for application purposes only.
Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
| Vehicle Information | |
| Lift Height | 0-2 inch|3 inch|4 inch|5 inch|6 inch|6 plus inch |