20+ YRS EXPERIENCE IN THE 4WD INDUSTRY 
OVER 11,000 4WD PRODUCTS ONLINE 
20+ STOCKISTS AUSTRALIA WIDE 
SHIPPING AUSTRALIA WIDE & INTERNATIONALLY 
Fabrication
| Fabrication |
Sub-Categories
Chromoly Rod End/Heim Joint 3/8 Inch (Left Hand Thread) (Each) - XML6
PLEASE NOTE: these are NEW OLD STOCK items and are being sold at Heavily discounted prices, some are below our cost.As such we can not accept returns on change of mind or incorrect purchases.Stock is limited and we can not guarantee current stock lev..
$38.00$18.00 Ex Tax:$34.55
Chromoly Rod End/Heim Joint 7/8-7/8 Inch (Left Hand Thread) (Each) - XML14
Chromoly Rod End 7/8" (Left Hand Thread)
Bare rod end only no weld in bung, lock nut or missaliangment spacers.
SOLD EACH
Terminology
Eye I.D: Inside measurement if the heim eye without the misalignment spacer.Shank: The shank size is the thread ..
$43.00 Ex Tax:$39.09
Chromoly Rod End/Heim Joint 7/8-7/8 Inch (Right Hand Thread) (Each) - XMR14
Chromoly Rod End 7/8" (Right Hand Thread)
Bare rod end only no weld in bung, lock nut or missaliangment spacers.
SOLD EACH
Terminology
Eye I.D: Inside measurement if the heim eye without the misalignment spacer.
Shank: The shank size is ..
$43.00 Ex Tax:$39.09
Chromoly Rod/Heim Joint End 3/4 Inch (Left Hand Thread) (Each) - XML12
Chromoly Rod End 3/4" (Left Hand Thread)
Bare rod end only no weld in bung, lock nut or missaliangment spacers.
SOLD EACH
Terminology
Eye I.D: Inside measurement if the heim eye without the misalignment spacer.Shank: The shank size is the thread ..
$48.00 Ex Tax:$43.64
Chromoly Rod/Heim Joint End 3/4 Inch (Right Hand Thread) (Each) - XMR12
Chromoly Rod End 3/4" (Right Hand Thread)
Bare rod end only no weld in bung, lock nut or missaliangment spacers.
SOLD EACH
Terminology
Eye I.D: Inside measurement if the heim eye without the misalignment spacer.Shank: The shank size is the thread..
$48.00 Ex Tax:$43.64
Lock Nut 1.25 Inch (Left Hand Thread) (Each) - JNL16
Lock Nut 1.25" (Left Hand Thread)
Bare lock nut only no rod end, weld in bung or missaliangment spacers.
SOLD EACH
Terminology
Shank: The shank size is the thread size of the rod end to be screwed into the bung.
Shank = 1 1/2"..
$10.00$5.00 Ex Tax:$9.09
Lock Nut 1/2 Inch (Left Hand Thread) (Each) - JNL8
Lock Nut 1/2" (Left Hand Thread)
Bare lock nut only no rod end, weld in bung or missaliangment spacers.
SOLD EACH
Terminology
Shank: The shank size is the thread size of the rod end to be screwed into the bung.
Shank = 1/2"
..
$5.00$2.00 Ex Tax:$4.55
Lock Nut 1/2 Inch (Right Hand Thread) (Each) - JNR8
Lock Nut 1/2" (Right Hand Thread)
Bare lock nut only no rod end, weld in bung or missaliangment spacers.
SOLD EACH
Terminology
Shank: The shank size is the thread size of the rod end to be screwed into the bung.
Shank = 1/2"..
$5.00$2.00 Ex Tax:$4.55
Lock Nut 3/4 Inch (Left Hand Thread) (Each) - JNL12
Lock Nut 3/4" (Left Hand Thread)
Bare lock nut only no rod end, weld in bung or missaliangment spacers.
SOLD EACH
Terminology
Shank: The shank size is the thread size of the rod end to be screwed into the bung.
Shank = 3/4"..
$6.00$3.00 Ex Tax:$5.45
Misalignment Spacer 1 Inch to 14mm Zinc (Patrol Width) (Each) - DFIMS1-Patrol
Misalignment Spacer 1" rod end to 14mm mounting bolt
Bare misalignment spacer only no rod end, weld-in bung or lock nut.
SOLD EACH (2 x spacers needed per rod end)
Terminology
Spacer Width: This is the inside measurement of the mount..
$11.00 Ex Tax:$10.00
Misalignment Spacer 1.25 Inch to 3/4 Inch (Each) - SUP-CRE12534MAS
PLEASE NOTE: This product is a Clearance/Runout item and as such stocks are limited.
While we make every effort to make sure stock levels on the website are up to date we can not guarantee that this product is still available at the time of sale.
P..
$13.00$9.00 Ex Tax:$11.82
Misalignment Spacer 1.25 Inch to 9/16 Inch (Each) - SUP-CRE125916MAS
Misalignment Spacer 1.25" rod end to 9/16" mounting bolt
Bare misaliangment spacer only no rod end, weld in bung or lock nut.
SOLD EACH (2 x spacers needed per rod end)
Terminology
Spacer Width: This is the inside measurement of the ..
$11.00$5.00 Ex Tax:$10.00
Trail Gear OD Tube Clamp (Each) - TG180-KIT
Trail-Gear O.D. Tube Clamps are ideal for suspension and steering brackets that you need attached to a section of tubing when you don't want to weld the bracket directly to the tubing because adjustment or frequent removal of the bracket is needed.
..
From $111.00$89.00 Ex Tax:$80.91
Trail Gear Tube Coupler 1.25 Inch Tube OD x 0.095 Wall (Each) - 180095-KIT
Chromoly Interlocking Tube Clamps
Please note: The tube wall thickness of this product is 0.95"
Need to place a support tube across your truggy or buggy, but need the flexibility to remove a motor, transmission, or even a seat? We have the perfec..
$90.00$65.00 Ex Tax:$65.45
Trail Gear Tube Coupler 1.25 Inch Tube OD x 0.1.20 Wall (Each) - 180096-KIT
Chromoly Interlocking Tube Clamps
Please note: The tube wall thickness of this product is 0.120"
Need to place a support tube across your truggy or buggy, but need the flexibility to remove a motor, transmission, or even a seat? We have the perfe..
$90.00$72.00 Ex Tax:$65.45
Trail Gear Tube Coupler 1.75 Inch Tube OD (Each) - 180112-KIT
Chromoly Interlocking Tube Clamps
Need to place a support tube across your truggy or buggy, but need the flexibility to remove a motor, transmission, or even a seat?
We have the perfect solution for you: Trail-Gear’s Interlocking Tube Clamps.
Th..
From $90.00$72.00 Ex Tax:$65.45
Trail Gear Tube Coupler 2 Inch Tube OD (Each) - 303722-KIT
Chromoly Interlocking Tube Clamps
Need to place a support tube across your truggy or buggy, but need the flexibility to remove a motor, transmission, or even a seat?
We have the perfect solution for you: Trail-Gear’s Interlocking Tube Clamps.
Th..
From $106.00$85.00 Ex Tax:$77.27
Weld in Bung 1.25 Inch (Left Hand Thread) (Each) - SUP-CRE125WIBLH
PLEASE NOTE: This product is a Clearance/Runout item and as such stocks are limited.
While we make every effort to make sure stock levels on the website are up to date we can not guarantee that this product is still available at the time of sale.
P..
$23.00$19.00 Ex Tax:$20.91
Weld in Bung 1.25 Inch (Right Hand Thread) (Each) - DFIBUNG125R
PLEASE NOTE: these are NEW OLD STOCK items and are being sold at Heavily discounted prices, some are below our cost.As such we can not accept returns on change of mind or incorrect purchases.Stock is limited and we can not guarantee current stock lev..
$28.00 Ex Tax:$25.45
Weld in Bung 1/2 Inch (Left Hand Thread) (Each) - SUP-CRE12WIBLH
Weld in Bung 1/2" (Left Hand Thread)
Bare weld in bung only no rod end, lock nut or missaliangment spacers.
SOLD EACH
Terminology
Shank: The shank size is the thread size of the rod end to be screwed into the bung.
Tube I.D: The inside d..
$11.00$5.00 Ex Tax:$10.00
Weld in Bung 1/2 Inch (Right Hand Thread) (Each) - SUP-CRE12WIBRH
Weld in Bung 1/2" (Right Hand Thread)
Bare weld in bung only no rod end, lock nut or missaliangment spacers.
SOLD EACH
Terminology
Shank: The shank size is the thread size of the rod end to be screwed into the bung.
Tube I.D: The in..
$11.00$5.00 Ex Tax:$10.00
Weld in Bung 3/4 Inch (Left Hand Thread) (Each) - SUP-CRE34WIBLH
PLEASE NOTE: This product is a Clearance/Runout item and as such stocks are limited.
While we make every effort to make sure stock levels on the website are up to date we can not guarantee that this product is still available at the time of sale.
P..
$17.00$9.00 Ex Tax:$15.45
Weld in Bung 7/8 Inch (Left Hand Thread) (Each) - SUP-CRE78WIBLH
PLEASE NOTE: This product is a Clearance/Runout item and as such stocks are limited.
While we make every effort to make sure stock levels on the website are up to date we can not guarantee that this product is still available at the time of sale.
P..
$25.00$16.00 Ex Tax:$22.73