facebookInstagramTikTokYou Tube
Sale

Offroad Animal Cobra Bull Bar Suitable For Nissan Patrol Y62 2020 on - FB-NPT-Y62-19-PR-ASM0-XXX

Brand:  Offroad Animal Product ID:  51532
SKU:  FB-NPT-Y62-19-PR-ASM0-XXX
Available Options
RRP:  $3,250.00
Special Price:  $3,185.00  (Each)
SAVE:  $65.00

Supply Only Price.

-+
|
The S5 Patrol finally looks good.  No offense to Nissan but the older Y62 models didn't quite have a tough look about them.  But the Series 5 fixed that with a much improved front end. Well the Cobra bar from Offroad Animal makes it look even better. You can give a serious face lift to your Patrol and give it that cool aggressive look that will make you smile every time you look at it.  Not only does this bar look the part but it's super functional as well.  A great platform for a winch and lights and does the job of protecting the front from Animal strikes and offroad mishaps.

This bar suits Series 5 Y62 TI patrols from MY19 on, TI-L requires a few nutserts to be installed

MY22 vehicles requires grille cut

Y62 Warrior Replacement bashplate in Development

Benefits
  • Full steel construction for ultimate protection, One piece design
  • Much improved approach angle over factory bumper and all competitors
  • Great platform for mounting a winch
  • Ability to mount winch without removing the whole bar (great for winch servicing)
  • Great platform for mounting lights or antennas
  • Works with all parking sensors and Adaptive cruise, and Autonomous Emergency braking features.
  • Looks awesome on the front of your Patrol
  • Much lighter bar compared to main competitors due to our much smarter design
Features
  • ADR compliant
  • Airbag compatible
  • Works with parking sensors, and Adaptive Cruise Radar
  • Works with factory head light washers
  • Welded one piece bar with welded wing supports for super toughness
  • Zinc plated then powder coated Matte black as standard
  • Hi lift jacking points integrated into design as standard
  • Suits most winches with no extras required including Warn Zeon winch
  • Factory fog lights relocate into the bar
  • Number plate flip included as standard for those running a winch
  • Can be colour coded to vehicle
  • Included as standard is Rated 20mm steel recovery points included as part of mounts, each point is rated to 4500kg

While the bumper takes most single row led light bars (we suggest the Offroad Animal 22" LED light bar)

Included in box
  • 1 x Front bar weldment
  • 1 x LH chassis impact bracket
  • 1 x RH chassis impact bracket
  • 1 x mesh fairlead mount
  • 1 x Mesh infill LH
  • 1 x Mesh infill RH
  • 1 x Light cover Mesh LH
  • 1 x Light cover Mesh RH
  • 1 x centre bash plate
  • 1 x under wing panel LH
  • 1 x under wing panel RH
  • 1 x winch control box bracket
  • 1 x number plate flip
  • 1 x ACC mount
  • A butt load of nuts and bolts to make it all sit nice and pretty
Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
Vehicle Information
Lift Height0-2 inch|3 inch|4 inch|5 inch|6 inch|6 plus inch