facebookInstagramTikTokYou Tube
Sale

Front Runner Canopy Load Bar Kit / 1165mm (Kit) - KRCA007

Brand:  Front Runner Product ID:  43400
SKU:  KRCA007

RRP:  $502.00
Special Price:  $452.00  (Kit)
SAVE:  $50.00

Supply Only Price.

-+
|

A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 40mm Feet, 2 1165mm Load Bars, 2 1150mm Canopy Tracks, and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle.


You may not have the need for a full roof rack and find that you can get by using a set of Front Runner Load Bars.


These Load Bars are mounted to the vehicle’s roof via a set of supplied Tracks and Track Mounted Feet.


Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.


Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.


The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.


The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack.


Made from stainless steel and a durable, weather resistant black powder-coated aluminum.


Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.

Front Runner Canopy Load Bar Kit / 1165mm (Kit) - KRCA007

KRCA007 - Canopy Load Bar Kit / 1165mm (W) - by Front Runner


Consisting of:

2 x FASS012 - Foot Set / 40mm-50mm - by Front Runner

1 x LBSK013 - Load Bar Pair 1165mm(W) - by Front Runner

1 x TRCA003 - Canopy Tracks / 1150mm(L) - by Front Runner


Material used:

Black epoxy powder-coated T6 aluminium

3CR12 Stainless Steel


Approximate Installed Weight 7kg (14lbs)

The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.

If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.

If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.


Shipping Dimensions:

Width 245mm (10")

Length 1290mm (51")

Height 115mm (5")


Shipping Weight:

Weight 7.6kg (16.8lbs)

Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
Vehicle Information
Lift Height0-2 inch|3 inch|4 inch|5 inch|6 inch|6 plus inch