Metalcloak Baller Joints™ HD Ball Joints Suitable for Jeep Wrangler JL/Gladiator JT - 1911

Brand: Metalcloak Jeep Gladiator Lift Kits	Product ID: 49414
SKU: 1911
High Stock

$1,216.00 (Kit)

Supply Only Price.

qty :

Product Details

"BALLER" Informal adjective: extremely good, impressive or excellent.

MetalCloak's Baller Joints™ HD Ball Joints for the Jeep JL Wrangler and JT Gladiator are the ONLY Ball Joints that are comprised of top level materials with ALL the best features contained in one package. This is the last ball joint you will ever need. Upper and Lower Load Bearing, Captured, Fully Sealed, Adjustable, In-Jeep rebuildable and Made in the USA.

Features Include:

Load Bearing Upper and Lower Joints
Hardened Steel Races
Induction Hardened Chromoly Spindle & Ball
Composite Bushing for Radial Loads (Side to Side Movement)
Fully Sealed top and bottom O-ring AND Shaft Wiper Seals
Recessed Zerk Fittings for Easy Service/Grease
Adjustable Pre Load for Upper & Lower Joints
MetalCloak LockRing Wrench Included
In-JEEP Rebuildable Upper & Lower
Gold Zinc, Clear Zinc & Anodized Red Finish
Made in the USA

MetalCloak uses the best features and combines them with top quality materials to create a ball joint replacement set that is unrivaled; this is the only ball joint that is Fully Sealed, Captured, Adjustable, On-Jeep rebuildable and made in the USA. Replace your worn ball joints with the best you can get.

MetalCloak ball joints start with Chromoly Spindle & Ball with Induction Hardened surface strength that resists wear and provides a maximized bearing area to distribute force loads; the material gives superior ability to absorb energy without fracture over inferior materials.

Composite bearing sleeve slide over the spindle to handle shock loads and are the most resistant to deformation. Ball and spindle are both load bearing and utilize metal-on-metal strength captured with Tool Steel Races that eliminate memory steer and are long lasting.

Both upper and lower joints are adjustable for preload tension, have recessed zerk fittings for servicing and are sealed with multiple Buna-N Rubber O-Rings along with wiper seals on the shafts to keep contaminants out and grease in.

Aluminum lock nut and Thread on Top Cap capture the joints so there is no possibility of pulling the joints out of the C.

Anodized Red aluminum with Silver and Gold Zinc steel plated components highlight the quality and craftsmanship and are sure to let others know you appreciate American Made quality and top notch performance. The ONLY joints that are Sealed, Captured, Adjustable, and On-Jeep rebuildable; the last ball joints you will ever need.

Like other ball joints; only better.

THE TECH

Upper & Lower "Baller" Ball Joints

MetalCloak offers the ONLY Ball Joints that are comprised of top level materials with ALL the best features contained in one package; this is the last ball joint you will need. Upper and Lower Load Bearing, Captured, Fully Sealed, Adjustable, In-Jeep rebuildable and made in the USA.

Upper Ball Joint Diagram

Load Bearing Joints

Pre-load on upper Ball Joint diverts force-loads from the lower joint and shares the load between both pivot locations.

Thread Together Captured Design

Ball Joints press in from the bottom of the C. Aluminum lock nut and Top Cap Thread on to capture the joints so there is no possibility of the Joint pulling out.

Shaft & Ball Benefits

MetalCloak "Baller" ball joint Spindle/Ball units are formed of solid Chromoly steel for durability and then are Induction Hardened for incredible surface strength that resists wear. The oversized bearing surface provides maximum area to distribute force loads from on and off-road use and abuse. The induction hardening provides unsurpassed longevity for smooth bearing operation. The Baller Joint Spindle/Ball composition is the best you can get to absorb energy without possibility of fracture while maintaining an ideal hardened bearing surface that ensures a long service life; it's quality you can count on.

Bearing Races

The Concave Bearing Races are high impact shock resistant machined and heat treated tool steel with maximum surface contact to spread force loads, this allows more pre-load relief while still resisting memory steer. Races are indexed to prevent rotation inside the ball joint housing.

Lower Ball Joint Diagram

Ball Joint Wrench

The included wrench is specially designed and laser cut to precisely fits the lower ball joint lock ring and allows for ease of installation. The wrench is made of laser cut 3/16" hot rolled steel, the tool is finished in gold zinc for a classic premium look and long lasting MetalCloak quality.

Hand Built and Made in America

The MetalCloak Upper and Lower "Baller" Ball Joints are each meticulously assembled in house with Hand Built craftmanship right here in the USA.

What's in the Kit?

Upper Ball Joints
Lower Ball Joints
Ball Joint Wrench

TECHNICAL SPECIFICATIONS

Items	Details
Compatibility	2018 - Current JL Wrangler 2019 - Current JT Gladiator
Upper Ball Joint Cap	6061 Aluminum Hex
Upper Ball Joint Spindle	Chromoly Steel
Upper Ball Joint Housing	AISI 1045 Steel
Lower Ball Joint Cup	AISI 1045 Steel
Lower Ball Joint Spindle	Chromoly
Ball Joint Wrench	3/16" Hot Rolled Steel
Coating	Gold Zinc \| Clear Zinc \| Red Anodize

Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.

Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.