Dobinson MRR 3 Way Adjustable Shock 6 Inch (150mm) Lift Front Suitable For Toyota LandCruiser 80/105 Series - MRA59-A684
Brand: Dobinsons | Product ID: 48541 | |
SKU: MRA59-A684 | ||
Special Price: $563.00 (Each)
SAVE: $17.00
Supply Only Price.
3-WAY DAMPING ADJUSTMENT
The new 6063 honed aluminium reservoir, revised light-weight floating piston, Carbon Fibre/PTFE/Disulphide composite wear band, improved 3-stage sealing system and the ability to run lower gas pressure with the addition of the reservoir compression adjuster, have combined to provide massive reductions in shock absorber friction, resulting in an improved vehicle ride and damping performance.
50mm and 60mm extra large bores, combined with remote oil reservoirs, provide the perfect housing for an enormous oil capacity and surface area to resist shock fade and maintain vehicle handling.
HIGH SPEED COMPRESSION ADJUSTMENT
LOW SPEED COMPRESSION ADJUSTMENT
REBOUND ADJUSTMENT
High speed compression primarily affects the compression damping during high speed shaft movements such as harsh or square edge bumps and harsh vehicle landings.
Low speed compression primarily affects the compression damping during low speed shaft movements such as vehicle pitch, dive and roll, wheel traction and vehicle ride (harshness and plushness).
Rebound damping primarily affects vehicle traction, damper top-out and vehicle body movements such as vehicle pitch, dive and roll.
HIGH FLOW PISTON
50 / 60mm CNC Machined High Flow Billet Aluminium Race Piston
HEAVY DUTY BODY
3mm Thick Heavy Duty DOM Seamless 56mm / 66mm O.D. shock Body Precision Honed to +/- 0.04mm
3 STAGE SEALING SYSTEM
Upgraded 3 Stage FKM‑HNBR Sealing System
CNC MACHINED COMPONENTS
TSUGAMI™ CNC machined components for precise tolerances
REMOTE RESERVOIR
60mm 6063 Aluminium Remote Reservoir
HIGH STRENGTH SHOCK SHAFT
5140 HV900 Hard Chrome Plated, Heat treated 18 / 22mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
MORE FEATURES
REBUILDABLE
Fully Rebuildable Design
LOWER LEG
Single Piece Lower Leg
EDP PROTECTION
Electro-Deposit Primer Surface Protection
BOLT ON
Direct Bolt-On Design
WELDED END MOUNTS
CNC TIG Precision Welded Body End Mounts
HIGH PRESSURE HOSES
Parker™ Braided High Pressure Hoses
ADJUSTABLE SPRING SEAT
T6 6061 Height Adjustable Spring Seat*
COMPOSITE WEAR BAND
Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‑wear performance
FLOATING PISTON
Lightweight CNC Machined Low Friction floating piston
RUBBER BUSHINGS
High Quality O.E.M. Grade Natural Rubber Bushings
THE ULTIMATE OFF-ROAD MACHINE
The 3-Way Adjustment design reduces the main piston working load, distributing heat more evenly between the main piston and the reservoir piston for reduced operating temperatures, and allows quick and easy damping changes for the ultimate in shock tunability in varying terrain and vehicle loads, to keep you controlled and comfortable. Enjoy the ride...
PERFORMANCE & OFF-ROAD DURABILITY
The revised sealing design now provides a 3 stage FKM-HNBR shaft seal system that, when combined with the reduced operating frictions, provides a vastly increased service life with reduced wear.
QUALITY COMPONENTS
Each component of the MRR shock absorber has been refined and improved to offer a higher level of ride quality, vehicle control and shock absorber performance.
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
Vehicle Information | |
Lift Height | 6 inch |