Superior Electronic Speedo Corrector with Bluetooth Suitable For Toyota LandCruiser/Hilux Nissan Patrol GQ/GU - SGI-100BT
Brand: Superior Engineering | Product ID: 33424 |
SKU: SGI-100BT | |
(This item could be out of stock. If it is, we will contact you after your order is placed. Alternately, please contact us to check current stock levels.)
|
Special Price: $200.00 (Each)
SAVE: $10.00
Supply Only Price.
We include specific instructions to suit the VDJ70, Hilux KUN/GGN and Patrol GQ/GU vehicles.
Toyota LandCruiser
- 70 Series - VDJ76, VDJ78 & VDJ79 - (will not suit 08/2016 on DPF models)
Toyota Hilux
- KUN
- GGN
Nissan Patrol
- GQ
- GU
This unit can be used in any Toyota/Nissan vehicle that has an electronic speedo and the dash driven by a single pulse wire.
Note: Some models such as the LandCruiser 200 Series and 08/2016 on LandCruiser 70 Series have speedos driven from the CAN vehicle network, this unit will not suit these vehicles.
This kit uses the SGI-100BT Universal Signal Interface Unit & can handle nearly all of your electric speedometer signal conversion and calibration issues. The SGI-100BT can recalibrate a 2,000 pulse per mile (ppm) through 250,000ppm electronic speedometer pulse rates, either up or down. The SGI-100BT is great for adjusting aftermarket and OEM electric speedometers on vehicles after changing rear end gears, tire sizes, or drive train changes affecting the speedometer.
The SGI-100BT is used as either a signal multiplier or signal divider (25%-400%), making this unit extremely flexible for almost any application. While the SGI-100BT is intended to correct only the signal feeding the electronic speedometer, in many cases where a speed signal is shared or on a data bus, the SGI-100BT can instead correct the signal feeding the engine and transmission computers. For even greater flexibility, the SGI-100BT allows multiplication up to 16x, taking an 8,000ppm signal and converting to a 128,000ppm output, and includes a regulated 5V sensor output, allowing use of the Dakota Digital SEN-01-5 speed sensor. A built-in LED display and push-button switches simplify set-up and calibration.
Note: If your vehicle is equipped with an anti-lock braking system (ABS), it is advised to ensure the signal reaching the ABS controller is not altered to eliminate any potential problems affecting control algorithms within the system. Some vehicles also utilize the output shaft speed to calculate transmission slip and lock-up. When a signal feeding the PCM is altered, this may cause the PCM to detect a constant slip. Consulting a service manual may be of assistance in determining the signal routing within the vehicle if the SGI-5 is decided to be used in a situation such as this.
Unit measures 4" x 2" x 1" and is designed to be mounted inside a vehicle.
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
Vehicle Information | |
Lift Height | 0-2 inch|3 inch|4 inch|5 inch|6 inch|6 plus inch |