TRED GT 8200kg Kinetic Rope (Each) - TR8KR
Brand: Tred | Product ID: 46332 |
SKU: TR8KR | |
(This item could be out of stock. If it is, we will contact you after your order is placed. Alternately, please contact us to check current stock levels.)
|
Special Price: $170.00 (Each)
SAVE: $9.00
Supply Only Price.
TRED GT 8,200KG Kinetic Rope.
8,200KG minimum breaking strength 9 meters long. TRED GT Kinetic Ropes are constructed using high quality Nylon 66 and offer up to 30% elongation. After assembly, each TRED GT rope is coated in a UV treatment.
TRED GT Kinetic Ropes feature a highly durable vinyl polymer-coated eyelets for extra protection to critical parts when in use
TRED GT Kinetic Ropes use the kinetic energy generated during use to help in removing a stranded vehicle. The combination of the recovery vehicle pull and the tension in the rope creates a ‘recoverying’ effect that can pull a vehicle free from being stuck or unable to move itself. When used in accordance with these guidelines, vehicles may be recovered with minimal risk of injury to people, or damage to vehicles or equipment.
It is very important to use the correct recovery rope. A rope with a ‘too light” breaking strength may break under load. A rope with a ‘too heavy’ breaking strength may not be stretched properly and more stress will be placed on the recovery points, possibly causing damage or injury. The minimum breaking strength of the rope should be between two and three times the GVM of the ‘lighter’ of the two vehicles used in the recovery process. Please note that the recovery rope will be under greater load if the vehicle is bogged in mud, sand or heavily loaded. If the GVM is not stated on the identification plate of a vehicle or its registration certificate, it could be available from the owner’s handbook or from the vehicle manufacturer.
Local NATA laboratory tested to ensure TRED quality standards are met and exceeded.
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
Vehicle Information | |
Lift Height | 0-2 inch|3 inch|4 inch|5 inch|6 inch|6 plus inch |