facebookInstagramTikTokYou Tube
Sale

GME TX3520S DSP Compact Remote Head UHF Radio (Each) - TX3520S

Brand:  GME Product ID:  26887
SKU:  TX3520S
     (This item could be out of stock. If it is, we will contact you after your order is placed. Alternately, please contact us to check current stock levels.)
RRP:  $599.00
Special Price:  $575.00  (Each)
SAVE:  $24.00

Supply Only Price.

-+
|
Universal Product Banner

UHF radio powered by digital signal processing for Pure Sound

The TX3520S displays the same rugged construction, comprehensive feature set and reliability as the TX3510S but with a remote head for vehicles with
limited cabin space. Now equipped with ScanSuite™, the TX3520S also enables uninterrupted communications with a group of like radios.
The shallow remote head allows access to the controls and a view of the LCD with the base unit mounted out of sight.
The microphone can attach to either the front of the remote head or rear of the base unit for obstruction-free use ensuring years of reliable communications.
Australian made GME radios now have a 5-year warranty.

Product Details

  • Powered by Pure Sound DSP engine
  • Full-spectrum backlit LCD microphone with Soundpath speaker
  • User selectable open and group scan
  • User adjustable squelch
  • User-selectable duplex channels
  • User-selectable priority channel
  • 104 in-built DCS codes
  • 50 in-built CTCSS codes
  • 5 digit selcall with quiet mode
  • Five-year warranty
  • Australian design and manufacture

In the Box:

  • Radio unit
  • Mounting cradle
  • 634B LCD Speaker microphone
  • Microphone clip
  • DC lead
  • Screw pack
  • Instruction manual

GME TX3520S DSP Compact Remote Head UHF Radio (Each) - TX3520S​

Product Specifications

GENERAL
Compliant SpecificationMeets AS/NZS 4365 for radio communications equipment in the UHF citizen and personal radio service.
Frequency Range TX476.425 – 477.4125 MHz
Number of Channels80 UHF CB
Channel Spacing12.5 kHz
Operation ModeSimplex channels 1–80 Semi Duplex channels 1–8, 41–48.
Scanning Speed20 channels per second
Antenna Impedance50 Ohms nominal
Nominal Battery Voltage13.8 volts DC
Operating Voltage Range10–15 volts DC
Overvoltage Protection25 volts DC max. At 18 volts DC the RF power is reduced, and the words ‘Hi DC’ flash.
Overcurrent ProtectionIn-line 2A Fuse
Frequency stability±2.5 PPM
ModulationFM
TRANSMITTER
RF Output5.0 watts max.
Maximum Deviation<± 2.5 kHz at + 20 dB limiting
Transmit Frequency Response+6 dB per octave 300 Hz to 3 kHz + 1-3 dB.
Current Consumption1.5 amps with 50 Ohms termination
RECEIVER
Intermediate Frequencies1st - 21.54, MHz 2nd - 450 kHz
Sensitivity-123 dBm for 12 dB SINAD unweighted
Selectivity-6 dB at + 3.5 kHz ‑60 dB at ± 12.5 kHz
Intermodulation Immunity73 dB
Blocking Immunity100 dB
Spurious Response Immunity70 dB
Audio Output Power3 watts average into 4 Ohms
Current consumption< 180 mA muted 600 mA @ max. A.F output
Receive Frequency-6 dB/Octave de‑emphasis, 300 Hz to 3 kHz + 1-3 dB
Conducted Spurious Emission<-57 dBm
>MECHANICAL SPECIFICATIONS
Dimensions102 (W) x 87 (D) x 23 (H) mm
Weight158 grams
Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
Vehicle Information
Lift Height0-2 inch|3 inch|4 inch|5 inch|6 inch|6 plus inch