facebook Instagram You Tube Linkedin Twitter

Superior Coil Springs 35mm Lift Suitable For Toyota Landcruiser 200 Series V8 Petrol Comfort Front (Pair)

BrandSuperior Engineering
Product ID28579
+-
RRP : $220.00
SALE Price : $190.00  (Pair)
SAVE : $30

Supply Only Price
(Unless stated otherwise above)

|

We are currently transitioning from Black to a Sliver finish on our coils, as such you may receive coils in either colour.
We will ensure where possible to supply sets of coils in the same colour and if you are concerned about what colour you will be supplied please contact us when you order to find out what colour we have for the coils you require.

Superior Engineering new coils, designed from the start purely for the best ride and performance available.

The design process started with on-vehicle measurements of the longest aftermarket shock for a given length, this data is then combined with the shock closed length and the suspensions actual physical limits.

Data is then combined with the highest grade of spring material offered in Australia, gives us the ability to produce the longest possible spring whilst still adhering to the required vehicle dimensions for a given lift height.

What this means is you have a longer, slightly softer more linear spring that is captive in the spring seat even when using the longest recommended shock.

By having a spring that is not only captive but linear rate at full extension you have good ground pressure even when at near full flex, which dramatically adds to vehicle stability when offroad.

The other major benefit of the longer, slightly softer rate is the far superior ride quality.

A short hard spring transmits forces from bumps back into the vehicle much more and doesn't allow the shock to actually do its jobs of controlling motion of the suspension.

The Superior Springs are designed around the same technology of the coilover race springs which when combined with a good shocks will provide unparalleled performance levels.

For vehicles which may carry loads at particular times we do recommended fitting Air-Bag assist.

This way both the ride and load carrying characteristics can be easily adjusted Suitable Forny condition or load requirement.

These coils are Suitable For Toyota Landcruiser 76/78/79 Series Medium Duty Front.

Sold as a pair.

Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.



QCOP/NCOP VSB14/VSB6 - When a Superior Engineering product is advertised as approved for use, it has been approved under the QCOP/NCOP VSB14/VSB6 guidelines and a design approval has been produced within the state of manufacture.
While the NCOP VSB14 rules have been technically accepted in many states and a Design Approval in one state is considered valid in another, in Victoria (and some states) an Approval Engineer is allowed to compile any additional data they may feel necessary to satisfy compliance.
As this data is outside the nominal minimum requirements (NCOP VSB14) in most states, this information is to be gathered by the customers contracted approval engineer at their expense.
Superior Engineering has engaged a wide network of Certified Professional Engineers throughout Australia to help customers with the approval processes. These Engineers have immediate access to Superior Engineering’s design and test data and are registered transport approval facilities within their respective states.
Should an independent Approval Engineer require specific data, Superior Engineer asks that they engage our Engineer in writing to contract him to Assess and Compile Engineering information, pertinent to each customer's requirements.
The level of data can vary widely and due to the sensitivity and incorrect use or application of test data, Superior Engineering will often refer customers to Engineering approved persons, that have the information and knowledge to perform the approval in the most effective and economical manner for the customer.
Vehicle Information
Lift Height 0-2 inch