Dynatrac EnduroSport® 3 Inch Suspension Lift Kit System 4 Suitable for Jeep Gladiator JT 2020 on - DT JT30-1X5310-L4

Brand: Dynatrac Jeep Lift Kits	Product ID: 49214
	SKU: DT JT30-1X5310-L4
High Stock

$4,509.00 (Kit)

Supply Only Price.

qty :

Product Details

The Dynatrac 3" Suspension Lift System 4 is designed for the driver looking to drastically improve the performance and ride quality of their vehicle. Made for adding lift height, wheel travel and shock damping to the JT.

100% bolt-on system makes for an easy install
2.5 EnduroSport shocks with Jeep JT specific valving offer greater shock damping and performance
3" front, 2" rear increase in wheel travel
3" lift height over stock
Dual rate coil springs with a lifetime guarantee against sagging/breakage
Fits 35" tires (37" with optional extended bump stop spacer kit, Part # DT922029)
Improves on and off-road ride quality over stock
Tested under rigorous off-road conditions to validate tune, performance, strength, and durability

Additional Detail

The Dynatrac 3" Suspension Lift System 4 for the 2018-UP Jeep Wrangler JT is designed for the driver looking to drastically improve the performance and ride quality of their vehicle. System 4 builds off of System 1 but with upgraded 2.5 EnduroSport shocks for improved shock damping and heat dissipation. This system includes 3" lift dual rate coil springs, 2.0 EnduroSport shocks, bump stop spacers, sway bar links, and all necessary hardware to complete the installation. With this combination of components, Dynatrac was able to increase wheel travel numbers by 3" in front and 2" in the rear, significantly improving the performance of the 2018-UP JL. The 3.0" Lift System allows for fitment of 35" tires when used with Dynatrac's recommended wheel specifications. For users looking to install 37" tires, an optional extended bump stop spacer kit (Part # DT922029) is available.

Important Notes

OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Wheels: 17x8.5" w/ 4.5" Backspace / -6mm Offset
Recommended Aftermarket Tires: 35 x 12.50 (37 x 12.50 with optional extended bump stop spacer kit PN: DT922029)
TECH NOTE: Springs are NOT rated for use with models equipped with EcoDiesel engines.
TECH NOTE: Not compatible with Wrangler JL 4xe or Unlimited Rubicon 392 trims.

Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.

Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.