facebook Instagram You Tube Linkedin Twitter

Superior Anti-Inversion Extended Shackles 2 Inch Suitable For Toyota Landcruiser 40/45 Series Front (15mm Pins)

BrandSuperior Engineering
Product ID321
+-

$205.00  (Pair)

Supply Only Price
(Unless stated otherwise above)

zip own it now,pay later
|

These Superior Anti-Inversion Extended shackles are made with 15mm pins for the front of the 40/45 Series Toyota Landcruiser 3/69-7/80 models.

Superior Engineering is the only company that utilises a welded pin design to stop the pins from working loose and wearing the shackle plates.

They feature an anti-inversion design to stop the springs being damaged when the shackles are hit into obstacles.

Greasable pins to ensure a comfortable ride that also accept standard bushes and manufactured 2 inches over standard.

NOTE: 3 degree caster wedges should also be purchased and fitted in the front when using Extended shackles.

Sold as a pair.


Video Transcription

Hi I am Mick from Superior Engineering.

Today I want to show you our new seventy six series extended shackles.

There is a few great things about these shackles, one is we use ten millimeter steel.

Standard shackles are only six millimeter steel, so these are a lot stronger and they really have to be because we are going extended, so they're about two inches longer than factory.

We do an SA5 zinc coating on them, so you can go to the beach or where ever you want to go and they're not going to go rust on you.

We use high tensile eighteen millimeter pins here so they will take the standard bushes.

Grease nipples we have, so obviously your suspension moves nice and smoothly.

In the back of it there is an anti-inversion bolt.

Now that bolt there is to actually stop your suspension travelling too far if you back your vehicle up on say a Landcruiser and hit a stump or something there is the opportunity your shackle will go too far and bend your springs.

That will actually stop that happening.

Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
Vehicle Information
Lift Height All Heights