Supply Only Price
(Unless stated otherwise above)
This is an adjustable Superior Tie Rod Comp Spec Suitable For Toyota Hilux, 4Runner and Surf SAF (Standard or Crossover) four-wheel-drive vehicle.
Tie rods come in a High Tensile Steel Bar, 33-35mm od and use the male threaded tie rod ends.
Coated in a zinc finish to resist corrosion.
These tie rods are must-have if you drive your truck hard.
Still cheaper to replace than a factory item as well.
23mm, 80 Series tie rod ends are used instead of the smaller Hilux items.
This Tie Rod comes with a pin-pin damper bracket so a pin-pin damper must be used as the factory damper won't fit. We Recommend this damper
Superior Engineering now includes ITS Seal Technology on internally threaded adjustable suspension linkages, eliminating the ingress of moisture or liquids that can cause corrosion or rust.
By adding a specially machined seal groove and incorporating a hydraulic seal between the locking nuts, the thread and the link, a perfect pressure-tight seal is created.
This patented process (PN-2015101600) is EXCLUSIVE to Superior Engineering's internally threaded items such as tierods, draglinks, Panhard rods and control arms (upper and lower).
Superior Engineering and other Brands of Steering components are replacement items that are in most cases upgraded to be a stronger better choice than the factory item. The Superior Engineering steering Components will meet or exceeds the factory specifications of OEM products. Although Superior Engineering and other brands may be stronger or exceed OEM specifications maintenance must still be performed on the components to ensure a safe and reasonable life out of the products. For all steering products, it is recommended to carefully check over the ends, internal and external threads and on hollow bars inside the rod every service you have on the vehicle or 6 monthly minimum to ensure nothing is loose or damaged or rusted. It is recommended to ensure no rust has formed on any steering parts as this may shorten the life or warranty of the product. Due to the harsh environments such as beach work or general 4wding rust may quickly form on steel steering components, it is recommended to replace the items if rust is present. If there is any wear or play in the ball joints, Tie rod ends or threads they must also be replaced for safety.
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
|Lift Height||All Heights|